How to Applique with Fusible AdhesiveI’ve already got a video showing the basics of using fusible adhesive. In a nutshell. . .

  • Trace the mirror image of the shape you want onto the paper side of the adhesive.
  • Fuse to the back of the fabric.
  • Cut out the piece.
  • Peel off the paper.
  • Fuse in in place.
  • Secure the edges with stitching.

You can watch the video here.

In that video I mentioned (repeatedly) that fusible adhesive can feel stiff.

I also talked about how the satin stitching that’s usually recommended around the raw edges often looks kind of clunky and heavy to me.

But then did a test of some new fusible adhesives I found – a test where I really liked the results! You can read that here.

Those results led me to give fusible adhesive another try in a real quilt – and I spent some time refining my technique (and the way I design my patterns) to suit these awesome new products.

So here are some new – much more detailed – instructions showing how I applique with fusible adhesive. I’m so in love with this technique – especially when combined with Quilt As You Go – that I’ll be using it on my next applique quilt too. All the images you see here are from the Cats Quilt. I’m working on a Birds quilt next. . .

How to Applique with Fusible Adhesive - instructions from Shiny Happy WorldStep 1 – Trace (or Print)

Trace the pattern onto the paper side of the fusible adhesive.  I use this printable fusible adhesive so I just printed out the page. Easy peasy.

Let me just pause here for a second and tell you how much this one thing – printable fusible adhesive – has changed the way I feel about my quilting. I despise tracing (I believe I’ve mentioned that here before – ahem) so being able to simply print out the page with all the pieces on it (and labelled, too!) is an absolute joy. I know the printable sheets are expensive and I just don’t care. I’ll never go back.

Make sure you’re tracing the mirror image of the pattern. It should be clearly stated on the pattern. If it hasn’t been reversed for you, you’ll need to put it face down in a window and trace off the back side so you get a mirror image.

If you’re tracing, be sure to trace the face too. You’ll need that there for Step 5.

How to Applique with Fusible Adhesive - instructions from Shiny Happy WorldStep 2 – Rough Cut

Rough cut around each shape. Leave a little bit extra all the way around – with a little extra extra (at least 1/4 inch) where there’s a dotted line.

On my patterns I use a dotted line to show you where a piece tucks behind another piece (like the ears tucking behind the head on this cat). That’s why you leave a little extra there.

How to Applique with Fusible Adhesive - instructions from Shiny Happy WorldStep 3 – Fuse to Fabric

Fuse each pattern piece to the wrong side of the fabric. Follow the instructions on whatever brand adhesive you’re using – they all vary in temperature used, with or without steam, and how long it should take

How to Applique with Fusible Adhesive - instructions from Shiny Happy WorldStep 4 – Cut

Cut around each piece. Cut directly on the solid lines. Leave a little seam allowance past the dotted lines – remember – those bits will tuck under another piece.

How to Applique with Fusible Adhesive - instructions from Shiny Happy WorldHere’s a close up of the cut ears so you can see better. The bit below the dotted line is the bit that will tuck behind the head.

How to Applique with Fusible Adhesive - instructions from Shiny Happy WorldStep 5 – Trace Details

Remember when I told you to make sure you traced the face in Step 1? Now you’re going to use that. Hold the face up to a window so the light shines through it. You’ll be able to see the facial features through all but the darkest fabrics, and the adhesive and backing will stabilize the fabric so you can trace on it without it crinkling up.

I trace just inside the eyes and nose, right on the lines for the mouth and whiskers.

If I were going to embroider the eyes and nose I’d trace right on those lines too.

Of course – you can trace the whole face in a good quality fabric marker and be done with it. It’s durable and easy and the quilt police will not come and arrest you if you “cheat” and draw on your quilt.

How to Applique with Fusible Adhesive - instructions from Shiny Happy WorldStep 6 – Quilt Block (optional)

If you’re doing Quilt As You Go (I did) then you can quilt your block before adding the applique. So easy!

Layer the block with a piece of 100% cotton batting. Quilt any pattern you like!  Find all the Quilt As You Go tutorials here.

If you’d rather do the quilting later, simply skip this step.

How to Applique with Fusible Adhesive - instructions from Shiny Happy WorldStep 7 – Fuse to Block

Peel off the paper backing and arrange the pieces on your background block. Tuck the ears behind the head. (Remember – all the dotted lines indicate where pieces tuck behind other pieces.)

Fuse the pieces in place, following the instructions on whatever brand you’re using.

How to Applique with Fusible Adhesive - instructions from Shiny Happy WorldStep 8 – Stitch

Stitch around all the pieces. Satin stitch is pretty common – and that’s what I demonstrated in this video. But I think it’s often too heavy and looks clunky. I much prefer the simple straight stitch I did here – nothing fancy.

I especially like it in black thread. I love the cartoony effect. :-) I stitched around the eyes and nose too. I tried to edit the photo so you could see that black on black stitching more clearly – but you might need to click on the photo to see it bigger.

To get a slightly thicker line for the mouth and whiskers, I stitched over those lines three times. You could opt to use thicker thread instead. I demonstrated sewing with different thread weights here.

Done! Now just make a bunch of them and you have a quilt. :-)

Easy and playful and fun! That’s my kind of quilting!

Best,
Wendi
Wendi_Gratz_Shiny_Happy_World