Last Updated on May 12, 2018 by wendigratz
Weird. I have no idea what has prompted the sudden influx.
I’ve had a topsy turvy doll on my Big List o’ Things to Make for a long time now, but the number of requests recently made me move it to the top of the list.
As soon as I mentioned it to Jo, she was full of IDEAS. She immediately started lobbying for a day and night doll. Not an awake and sleeping doll, but a doll with one girl all sunshine and bright, and another girl all deep indigo and starlight. She specifically asked for the night doll to have “dark blue hair – the darkest blue felt you have – sprinkled with tiny little embroidered stars in pale yellow.”
OK then. I can do that!
Instead of creating a pattern especially for one topsy turvy doll, I thought it would be more fun to show you how to turn any of the Dress Up Bunch dolls into topsy turvy dolls. You can apply the same basic technique to work with any rag doll pattern.
So here we go. . .
You’ll need to make two doll tops and no legs. The body will need to be chopped off at the waist so you can sew two bodies together.
Prep the Pattern
Measure down 4 1/2 inches from the top of the body front and body back pattern pieces of any Dress Up Bunch doll pattern. Draw a line parallel to the top of the pattern piece and cut off the bottom of the pattern. (if you’re using another pattern you’ll need to figure out where the “waist” of the body piece is and add 1/2 inch seam allowance before you make your cut.)
Cut Your Fabric
Cut out all the pattern pieces for two dolls except the legs. I usually use skin-colored fabric for the body, but I don’t like having to put a shirt on a topsy turvy doll so I cut the body pieces from fabric to match the dress. Only one doll half needs to have a stuffing opening, so cut a total of 3 doll front pieces and 2 doll back pieces.
Cut two pieces of fabric for the reversible skirt – each 10 1/2″ tall and 30″ wide. (You’ll need to calculate your own measurements if you’re using a different rag doll pattern.)
Leave One Stuffing Opening
Sew the two body back pieces together leaving almost the entire seam open for turning and stuffing. Don’t skimp on the size of the opening! You’ll be pulling a lot of fabric through here! I only sewed about an inch at the top and an inch at the bottom.
Press the seam open, then sew it to the back head piece. I stuck my turning stick through the stuffing opening so you can see it.
Sew Two Doll Tops
Follow the regular pattern instructions to make two doll tops, leaving the bottom open.
Man – these dolls look so creepy from the inside!
The second doll (the one without the stuffing opening) will use body front pieces on the front and back.
Make the Skirt
Fold one skirt rectangle in half so the short ends are lined up, right sides together, and sew those short ends together with a 1/4″ seam allowance. Press the seam open. That makes one (ungathered) skirt.
Repeat for the second skirt.
Turn one skirt tube right side out and put it inside the other tube, lining up the seams you just sewed. Now the right sides are together. 🙂 Sew the two skirt tubes together around the bottom of the skirt using 1/4″ seam allowance.
Flip the skirt so it’s right side out and press that bottom fold nice and flat.
Oooh! It’s looking nice! Both sides of the skirt are the “right” side. For now make sure it’s turned so that the fabric on the outside is the one matching the doll with the stuffing opening.
Gather the Skirt
I’ve got a video tutorial here showing how to gather. For this project I used the “old-fashioned” method of sewing two rows of basting stitches around the top (raw edge) of the skirt – sewing through both layers as if they were one – then drawing up the bobbin threads to gather up the fabric.
Fold the top of the skirt in half and half again and use pins to mark the four equal sections.
Fold the center front of the doll with the stuffing opening and mark the center front point. (The sides and center back are already “marked” with seams.)
Gather up the fabric of the skirt and stuff the skirt inside the doll with the stuffing opening, matching the center back seam of the skirt with the center back seam of the doll. Match the remaining pins to the remaining seams on the doll. Adjust the gathers so that the top of the skirt fits the bottom of the doll, adding additional pins as needed.
I’ll be honest. This part isn’t much fun. It’s not hard, but it takes some patience and fiddling.
Sew the top of the skirt to the bottom of the doll using 1/4″ seam allowance.
Add the Second Doll
You’re almost done! Turn the second doll right side out and stuff it inside the first doll and skirt. Make sure the back of the head is on the side where the stuffing hole is, and line up the side seams.
Sew around that same opening, this time 1/4″ from the first seam you sewed joining the skirt to the first doll. That means your seam allowance this time is 1/2 inch. This way you double-sew the skirt (extra-strong!) and also make sure all your basting stitches from gathering are well-hidden.
Turn Everything Right Side Out
You can do it – just be patient and go slowly. First pull the second doll outside of the first one, then pull the skirt through the stuffing hole and keep going until everything is right side out.
Stuff the doll, sew up the opening as instructed in the pattern, and you’re done!
The Dress Up Bunch dolls are normally two-thimble patterns – but turning them into a topsy turvy doll definitely bumps them up to three thimbles.
It’s not hard – it’s more about patience than actual skill – but I do NOT recommend this as a first project. Make a regular doll first, then start practicing radical, Frankensteinian surgery. Ok? 🙂